35 Years Ago Today

... I bought my first motorcycle.

I was stubborn. Right or wrong, I wouldn't by a motorcycle until I could afford a Harley. I thought spending a few hundred dollars on a Honda would be a waste of money and would just make getting a Harley take longer.


The day I bought it. Not much to look at, but I was jazzed.
Special features: 6 over forks and no front fender. In the early seventies, probably half the Sportsters sold had extended forks before leaving the dealer.

In the mid '70's, Harley's were in big demand in the LA area, so prices were relatively high for the times (especially when you didn't have a big network of bike riding friends). My outlook was pretty much limited to the local paper's classified pages.

Several weeks earlier, I had gone to the CHP auction and put bids on three bikes for $1,200-$1,500 each hoping I'd get one. I didn't, so the day I would have found out, I bought my Sportster. It was listed in the LA times. I was in Downey and it was close by in Paramount.


More special features: Radiator cap and dent in tank, Posa (or Lake?) Fuel slider carb, Braided vinyl fuel lines. The stock Tillotson carbs had a push inner coil for the throttle, so with this carb, it meant you'd rotate the grip forward to go. It was awkward.

The hillbilly who owned it, was the second owner and kept it in a backyard full of junk. It was only a 4 year old bike and the motor had already been rebuilt. By today's standards, the way it looked, you'd have thought it was a 10 to 20 year old bike.

I think I paid a whooping $1,300 for it, which was likely way too much, but I was getting impatient. Keep in mind, in 1975, new Sportsters were about $2,300 plus dealer fees and taxes at this time. Also, I had a friend with a '71 XLH who wanted about $2,000 for his bike.


More Special Features: Custom seat and sissy bar, a piece of cardboard for a battery lid, and no horn. Bonus feature: A tendency to jump out of third when getting it on.

In any case, I was happy, had plenty of fun with it and nine years later in '84, it got me $1500 credit towards a big twin.

This Month's Header

This month marks a couple of anniversaries.


Thirty five years ago, I bought my first motorcycle, a 1971 XLCH Sportster.


September 19, 1975. Downey, Ca. This photo wouldn't exist if it wasn't for my friend Zach Ananias. I was taking pictures the day I bought it when he happened to be driving by. Also, In the background is my first car, a '71 VW Super Beetle. In many ways, the Seventies, for better or worse was my era.

I therefore dedicate this month to First Rides and that great feeling you got when you took your first ride or finally got a bike of your own.

...and oh yeah... it's 2 years for the blog on the 8th.

Better Late than Never?

Funny How the Brain Works

About a year ago Big Scott of the Cycle Zombies sent me the following email:

"Hey Chris,
I just picked up a 1965 XLCH... the guy I bought it from said he was the 2nd owner, the original owner was a actor and used the bike in a lot of 'B' Biker Flicks? I think he went by the name of Snake, or Spider? probably Snake since that was the theme of the bike. Anyway you might recognize it or maybe know some history about it. Also on the motor it is stamped Sy Gray maybe his real name? Check out the pics on our blog and let me know your thoughts. Thanks, Scott"

One of the pics from the Cycle Zombies Blog April 2009. Hard to see in this shot, but it has snake scales painted on it's molded frame.


I didn't recognize the bike and told him the only guy called Spider (who rode a Sportster), I knew of was this Stunt Man from the late sixties.

One thought I had was, Since the bike and dude was in several movies, could the original owner have been a pal of Gary Littlejohn?

Then this and another photo of the bike were recently posted on the ZZ Chop blog saying it's now gone to Japan.

The weird part is, seeing it again, triggered the memory of where I had seen it. It was in the June 1996 25th Anniversary issue of Easyriders as one of the Staff Rides. Easyriders did have staff members called Snake and Spider, but since they made up lots of pen names to make the staff seem larger, there might not be a connection to the original owner/builder

This article was a typical Easyriders fanciful uninformative bull-shitty history of the bike. Big Scott's photos show the tags on the license plate as being last registered in 1986 and this photo was in the June 1996 issue. So the dude in the photo, Clay Dog (if that's his real name), might not be much of a rider or truly one of the bike's owners. It could be just a posed shot for that issue, since they were featuring the staff and their bikes.

One other funny/strange thing. When I first saw this photo in ER, I thought it would be cool to see more and better shots of the bike.

IronHead Ron

Two weeks ago I paid a visit to my friend Ron. Ron's a Die-Hard IronHead Sportster Hi-Performance Freak and always has some interesting projects up his sleeve.


Here's his XR Ironhead that he's building for the street. He started with a genuine factory XR 750 frame and oil bag.



Look close and you'll see that the cylinder fins have all been drilled. I believe he said it's a 77" stroker. Ron likes to use socket (Allen), head fasteners as much as possible.


His next project, an Ironhead Bagger. Ron always uses trick parts. That's a raked XLR frame and those are aluminum engine mounts dangling up front.


This 1965 stroker will go in the bagger. It's cases will be converted for electric start. When was the last time you saw Axtell aluminum Ironhead cylinders?


A flat track style Triumph project awaits in the back. Once again, featuring aluminum cylinders.


Here's a shot taken in Dec. 2001 of the Sportster from the above shot. There is a lot more going on here than at first glance. Ron shaves, drills, and massages each part before it goes on any of his rides. After an unfortunate incident, that motor went into the bike below.


This bike also recently had an unfortunate and very serious incident. We're glad Ron is now OK. Some of you may remember this bike from the Dec. 08 Century Motorcycles Post.

I'll post more shots as Ron progresses and finishes these very personalized machines.

Teaser

Studs Don't Last Long?

There's several jokes in there. You think they were going for a Peter Fonda look?

It Lives!

or Stu's Wild Ride!

The owner builder of the Way Too Much (my title), extreme Sportster chopper emailed me and sent some photos.

Proof that it's ridden. From the front, although extreme, it doesn't look that crazy. Looks sort of like a Dave Mann painting.

Hello, It is nice to see someone appreciates my effort and posted a picture. The picture you have is from the “Reading Public Museum “ exhibit. On display for five and half months along with fifty other bikes.


I built it from parts saved over the years. 17” 5 spoke front wheel, 22” over springer, 32” ape-hangers, triangle headlight, 2 gallon prism tank, 1968 Ironhead-kick only, custom velocity stacks, custom iron cross oil tank, custom seat-sissy bar with devils tail, exhaust pipes, carriage tail light, 16” 5 spoke rear wheel.


Outside the Reading Museum. No Fat Chicks! Stu says, "there's roughly a 120 pound weight limit on the rider because the seat is behind the rear axle".


Stu and his creation. Until seen with a person, being ridden, or two up, it was a little hard to get a complete sense of the bike's size or scale.

I have been in several eastern states with it, given thousands of rides to all ages who although they loved the thrill, were happy to get off quickly. The seat has steel and wood inter- structure with a thin leather covering so it doesn't collapse down on me. From the ground to the tip of the pipes is 6’-8”. I have ridden over 3,000 miles in five years with it, been in several magazines, and won a lot of “best of shows-or first places”. Always a crowd pleaser, and with the right female perched up top will just about shut down anything else going on when it rolls in. It is one of eight I rotate through, five Harleys, two Triumphs, and I just finished a 750 Suzuki GSXR in a chopper frame, 300 x 18 rear tire, 21” front, 15” over tubes, custom everything. Hope your weather is nicer than the COLD/SNOW we have going on here in Pa. Later…Stu

What were the chances of him seeing my post? Perhaps more people are reading this blog than I thought.

Way Too Much

The handle bars... extreme. The pipes, sissy bar, and velocity stacks... over the top... but,... that seat!

World's Fastest Motorcycle!!

At one time. I believe the record was set in 1969. Sportser powered too. Another gift courtesy of Big Scott.

Bronson Bikes

Next to the Easyrider bikes, the "Then Came Bronson" Sportster is probably the next most commonly imitated bike. Still, you don't see that many. I found these photos on the web (Flicker?), taken outside the H-D museum.

The third one back is a replica of the H-D Sprint used sometimes in the show for stunts.


It really wouldn't be too hard to build one. Most I've seen are not completely correct.


These two are the closest to the real thing in the bunch. They both feature a correct 21" front wheel.

What Sort of Man Reads MC ART?

An adventurous man. A free spirited man who can handle any curve life's long lonesome highway throws his way. The kind of soul that knows where to find MotorCycle entertainment that's cool to hang with.

The Sportster

...That Never Was

Where would they have fitted a generator?

The KL model was originally planned for release in the early 50's. Instead, the poor performing K model was rushed into production to fill it's gap. The high cam KL was continuously plagued by overheating problems, so the later (1954), experimental XL overhead design superseded it. At one point both the KL and XL were being tested side by side. Harley originally didn't want an overhead design based on the old flathead four cam bottom, but it worked and it's performance pretty much surprised everyone. What shouldn't be a surprise is that the XL's top end was designed by the same guy (Charley Featherly), who had done detailed work on the Knucklehead and later the Shovelhead. Since early Panheads had trouble with their aluminum heads, he stuck with iron like on Knuckles. Charley also thought that the valve covers on Pans held too much heat.

Sportsters Are a Drag

From 1968. Check out the unique fork mounted gas tank. Way cool!
Show and Go.... I dig when drag bikes double as show bikes.

More of DH's Dirty Sporty

In case you missed it on Stretch's blog, here's more of Dick's dirt bike.

Sort of a English Harley. You could build something quite similar starting with a '79 and up Ironhead.

The Dutch's Touches. The specs. of the bike are mention in the post below comments.

Von Dutched?

Recently Irish Rich did a post on this Dick Hirschberg Sportster. It was mentioned that it was painted orange and detailed by Von Dutch. It reminded of a bike and prompted me to find a photo from El Camino 1989.


Okay, it's different but, it also has that "From the hand of Von Dutch" look. The frame is pinstriped in a similar fashion. It has some interesting features. It has a hand shift. The brake pedal must be on the right side. It appears to be the front brake lever on the bars so, where's the clutch lever? Also, check out those frame, shock and swing arm mods. Anybody have any info about this unique machine?


Updated after some comments. Clutch Mystery Solved. You can see the clutch cable coming thru the motor mount and it's outer cable held at what at first seemed to be a pedal. The pedal is mostly lost in the black but it's looks like it's tip extends at the front of the primary right behind the top rear motor mount bolt.

4 $ALE

Vintage Ironhead Sportster Forks (Sold)

Off a 1972 XLCH (last year for the drum brake and the steel lower legs), identical to a '71 and similar to the earlier ones all the way back to '52. These are probably some of the coolest skinny forks you can run on a Harley. They have very thin lower legs. 7/8" stem. (Harley used this style on '71 & '72 Super Glides but, with a 1" stem). Includes the small rubber boots (not shown). For extra $, I can provide the axle and riser mount if you what them too. Email me for more info: ckallasart@gmail.com

If they don't sell, they' ll go up on Ebay.

All the coolest hep cats dig these forks!

As seen on Sonny's bike! Good excuse to run this cover.


Same bike from HA 69. Yeah, I posted this one before.

(Update), I'm pleased to say that Jerimiah from Love Cycles snatched the forks. He's one guy that will put them to good use. I'm looking froward to seeing them on his Knuckle.

The Best of Henry's St. Chopper Show, Part 2 Black Sporty

There are lots of cool Knuckles Pans and Shovels but, when it comes to Sportsters it takes a lot more finesse to get one right. Most dudes miss the mark. Here's one done with globs of class. As a matter of fact it made a big splash all over the internet after it was shown at the Grand Nationals in Pomona.

The key to this bike is keeping the lines simple and clean. Straight laced spokes and a tiny spool ad to the effect.


You just can't help but love that big SU with velocity stack not to mention the mag.


This qualifies as Engine Art. Clear braided oil and fuel lines takes one back to the seventies. Did I mention that this thing is clean?


Notice how the sissy bar's fender mounts nicely echo the lines of the forks, handlebars and risers?


In many ways this bike is understated. It just proves you don't need wild paint and wacky parts to knock'em dead.


You just don't get tired of looking at that SU. Clean lines, an Ironhead, and a big carb. Makes me think I'm looking at an old issue of Custom Chopper magazine.


It could have been featured in this issue.

Sportsters are for Sissies

Girlie Bikes? Apparently these guys didn't get the memo.

'72 XLCH Update

I shot the tank and at first wasn't too happy with the shade of orange (not as red as H-D's), but it's growing on me so, it will probably be fine for now. MC art is Photoshop, graphics to be determined (hmmm...). It's interesting how the combination of an orange tank and no front fender makes the bike take on a street tracker look but I'll be running a fender.

A future notion I may explore: bob a very small front fender (cut even or just a bit in front of mounts and very short in the back), then paint it flat black to minimize it further.

These are not the bike's original tanks so, at some point, I'll probably paint the other set of tanks and fenders white (homage to my first bike), then I can switch them back and forth when I crave a change.

As this previously posted art shows, I've had orange in mind for awhile.

For now I'm going with the bobbed rear fender. With it, I can reach the rear bolt that holds the cobra seat instead of having to remove the wheel. Then, I can switch out the two seats as the mood strikes. I've even thought about a solo and pillion.

I'd always thought to make this a convertible bike. When you like so many styles, having a bunch of spare parts is great alternative to owning several bikes. Less cost and less space needed. Now, where did I stash that turtle tank and boat tail?

Decisions Decisions?

I REALLY! need to finish my '72 XLCH, and the only thing holding me up is paint. I'm building it on the cheap as just a simple bike for buzzing around town. It's been sort of a personal challenge to build it with as little money spent as possible and I've always thought, If I don't like the way it rides when it's finished, I'll just sell it. so again the less spent, the better.

I have spares of just about everything including three sets of tanks and fenders.

Should I keep it a classic '72 with the stock front and rear fender, air cleaner, original H-D cobra style seat, and Gary bang sissy bar?


Or, the same except with bobbed fenders? Rear ain't bobbed here. This what I originally had in mind.

Or...

Lately, I've been leaning to a more vintage look. Bobbed fenders, round air cleaner, and an old buddy seat? I could also do it this way but with stock fenders.

I grow tired of colors fast so, paint will be one of the following: Black, Gray, White, or Orange (how'd that get in there?), with depending on color, Orange, Black, or White pin stripping.

Yeah, '72's didn't come with fork boots but, I like them.

To make matters worse, I also have the early '61-'66 4 gallon turtle tank and a boat tail.

I shouldn't ask but,...
Any thoughts?